• Version 1.33 PC
• Download 65
• File Size 22.07 KB
• File Count 1
• Create Date April 30, 2024
• Last Updated September 13, 2024

Freestyle2 USB Firmware v1.33 PC

Customers with Freestyle2 keyboards purchased in 2024 or later who are experiencing key "ghosting" issues can perform a simple firmware update to resolve the problem. Check your serial number to confirm if your keyboard supports DIY firmware updates.

800PBUSAAXXXX: Firmware Updates NOT Supported

800PBUSBAXXXX: Firmware Updates Supported (Factory Installed v1.32)

Installation Instructions

1. Download the file to your PC and unzip
2. Disconnect the keyboard and flip it over
3. Use a pair of strong tweezers or a thin object to remove the rectangular dark gray adhesive plastic BOOTLOADER BUTTON COVER on the backside of the right key module (see red arrow below). Note: You need to wedge underneath the cover and then pry it up.
4. Use a pencil or similar object to depress the exposed bootloader button (shown below) WHILE connecting the keyboard to your PC , release 1-2 seconds after connecting
5. If done correctly, a removable drive will appear on your PC called “RPI-RP2”
6. Copy/Paste the firmware file directly to that drive. The file will auto-install.
7. Disconnect and reconnect your keyboard

Bootloader Button Cover In Place

Bootloader Button Cover Removed

You can confirm the current Firmware Version in Device Manager